User`s guide

Setting Acquisition Parameters in Image Acquisition Tool
3-21
2
Optionally set any acquisition parameters and stop the preview.
3
Select Manual in the Trigger Type field on the Triggering tab.
4
Click the Start Acquisition button to get live feed from the device.
The Trigger button is activated in the Preview window once the acquisition
starts.
5
Click the Trigger button when you want to start logging data.
If you have a defined number of triggers (not infinite), then the acquisition will stop
when you have acquired that number of frames, based on the Frames Per Trigger
field on the General tab.
If Number of Triggers is set to infinite, use the Stop Acquisition button to
stop the acquisition.
If your device supports hardware triggering, that option will also appear in the Trigger
Type field.
To perform hardware triggering:
1
Select your device format and optionally click Start Preview to preview the device.
2
Optionally set any acquisition parameters and stop the preview.
3
Select Hardware in the Trigger Type field on the Triggering tab.