User`s guide

Setting Acquisition Parameters in Image Acquisition Tool
3-13
Note that if you set Frames Per Trigger to infinite, you cannot set Number of
Triggers on the Triggering tab.
Note: Some devices need a few frames to warm up, or may always skip the first frame.
If your device does that, change the number of frames accordingly to adjust for that. You
can also adjust for camera warm-up by using manual triggering on the Triggering tab.
Setting the Color Space
Use Color Space on the General tab to set the color space for the selected device
format. The Returned Color Space field has three options: rgb, YCbCr, and
grayscale. The setting that is your device format's default color space is shown as the
default. You can use the arrow to select another setting.
Additionally, if the default color space is grayscale, a value of bayer will be
available in the Returned Color Space field for some devices, and the Bayer Sensor
Alignment field will also be displayed. Use the drop-down list to select one of the four
possible sensor alignments. This feature allows the tool to demosaic Bayer patterns
returned by the hardware and interpolate them into standard RGB color images.
For more information about this feature, see the BayerSensorAlignment property
reference page.
Setting Device-Specific Parameters
View or change device-specific properties using the Device Properties tab. The selected
device's properties appear in the Properties area. The specific properties that appear
depend on your device.