User`s guide

3 Using the Image Acquisition Tool GUI
3-8
Selecting Your Device in Image Acquisition Tool
In this section...
“Selecting a Device and Format” on page 3-8
“Adding New Hardware” on page 3-10
“Using a Camera File” on page 3-10
Selecting a Device and Format
The Hardware Browser pane shows the image acquisition devices currently connected
to your system. Each device is a separate node in the browser. All of the formats the
device supports are listed under the device. Each device's default format is indicated in
parentheses. The format information displayed under a device comes from the device's
adaptor.