User`s guide

National Instruments Hardware
16-21
Note: The Image Acquisition Toolbox software is compatible only with specific driver
versions provided with the National Instruments software and is not guaranteed to
work with any other versions.
• Find out the driver version you are using on your system. To learn how to get this
information, see Determining the Driver Version.
• Verify that the version is compatible with the Image Acquisition Toolbox
software. For the correct driver information, check the list of supported drivers
on the Image Acquisition Toolbox product page at the MathWorks Web site
(www.mathworks.com/products/imaq).
If you discover that you are using an unsupported driver version, visit the National
Instruments Web site (www.ni.com) to download the correct drivers.
Determining the Driver Version for National Instruments Devices
To determine the National Instruments driver version you are using, run the
Measurement & Automation Explorer.
Select Help > System Information, and then see the NI–IMAQ Software field for the
driver version number.