User`s guide

16 Troubleshooting
16-12
You can use this demo application to verify whether your camera is using the CMU
DCAM driver. The following describes the step-by-step procedure you must perform to
access a camera through this demo application.
1
Select Start > Programs > CMU 1394 Camera > 1394 Camera Demo.
2
The application opens a window, shown in the following figure.
3
From the Camera Demo application, select Camera > Check Link. This option
causes the demo application to look for DCAM-compatible cameras that are available
through the IEEE 1394 (FireWire) connection.
The demo application displays the results of this search in a pop-up message box. In
the following example, the demo application found a camera. Click OK to continue.
4
Select Camera > Select Camera and select the camera you want to use. The
Select Camera option is not enabled until after the Check Link option has
successfully found cameras.