User`s guide

12 Using the Kinect for Windows Adaptor

12-16

Device-Specific Property – Depth

Sensor

Description

IREmitter Controls whether the IR emitter is on or off. Values

are on and off. Initially, the default value is on.

However, this is a sticky property, so the default

value is the last set value. If you set it to off, it

will remain off in future uses until you change the

setting.

An advantage of this property is that it is useful

when using multiple Kinect devices to avoid

interference.

SkeletonsToTrack Indicates the Skeleton Tracking ID returned as part

of the metadata. Values are:

[] Default tracking

[TrackingID1] Track 1 skeleton with Tracking ID

= TrackingID1

[TrackingID1 TrackingID2] Track 2 skeletons

with Tracking IDs = TrackingID1 and TrackingID2

TrackingMode Indicates tracking state. Values are:

Skeleton tracks full skeleton with joints

Position tracks hip joint position only

Off disables skeleton position tracking (default)

Note that if BodyPosture is set to Seated mode,

and TrackingMode is set to Position, no position

is returned, since Position is the location of the

hip joint and the hip joint is not tracked in Seated

mode.

Start the second videoinput object (the depth stream).