User`s guide

Connect to GigE Vision Cameras
11-3
Connect to GigE Vision Cameras
Use the gigecamlist function to return the list of available GigE Vision Compliant
cameras connected to your system. The function returns a table with the following
information for each camera detected: model, manufacturer, IP address, and serial
number. If you plug in different cameras during the MATLAB session, the gigecamlist
function returns an updated list of cameras.
In this example, two cameras have been detected.
gigecamlist
ans =
Model Manufacturer IPAddress SerialNumber
____________________ ___________________ _______________ ______________
'MV1-D1312-80-G2-12' 'Photonofocus AG' '169.254.192.165' '022600017445'
'mvBlueCOUGER-X120aG' 'MATRIX VISION GmbH' '169.254.242.122' 'GX000818'
Note: The GigE Vision support requires that you download and install the necessary
files via the Support Package Installer. The GigE Vision Hardware support package
installs the files for both the gige adaptor for the videoinput object and the gigecam
object. For more information, see “Installing the Support Packages for Image Acquisition
Toolbox Adaptors”.
If you have the support package installed and gigecamlist does not recognize your
camera, see the troubleshooting information in “GigE Vision Hardware”.