User`s guide

10 Troubleshooting
Note Image Acquisition Toolbox is compatible only with specific driver
versions provided with the National Instruments software and is not
guaranteed to work with any other versions.
• Find out the driver version you are using on your system. To learn how
to get this information, see Determini ng th e Driver Version.
• Ve rify that the version is compatible with Image Acquisition Toolbox.
For the correct driver information, check the list of supported drivers on
the Image Acquisition Toolbox prod uct pag e at the MathWorks We b site
(
www.mathworks.com/products/imaq).
If you discover that you are using an unsupported driver version, visit
the National Instruments Web site (
www.ni.com) to download the correct
drivers.
Determining the Driver Version for N ational
Instruments Devices
To determine the National Instruments driver version you are using, run the
Measurement & Automation Explorer.
Select Help > System Information, and then see the NI–IMAQ Software
field for the driver version number.
10-22