User`s guide

10 Troubleshooting
3 From the Camera Demo application, select Camera > Check L ink.This
option causes the demo application to loo k for DCAM-compatible cameras
that are available through the IEEE 1394 (FireWire) connection.
Thedemoapplicationdisplaystheresults of this search in a pop-up
message box. In the following example, the demo application found a
camera. Click OK to continue.
4 Select Camera > Select Camera and select the camera you want to use.
The Select Camera option is not enabled until after the Check Link
option has successfully found cameras.
5 Select Camera > Init Camera. In this step, the demo application checks
the values of various camera properties. The demo application might resize
itself to fit the video format of the specified camera. If you see the following
dialog box message, click Yes.
10-12