User`s guide

3 Project Generator
CCS Board Configuration State Response by Software
Code Compos er Studio has more
than one board configured. The
board name specified in the Target
Preferences block is one of the
configured boards.
Connects to the specified board.
Code Compos er Studio has more
than one board configured. The
board name specified in the Target
Preferences b lo ck is no t one of the
configured boards.
(*)
Returns a message asking you
to select a board from the list of
configured b oards. You h ave two
choices:
• Select a board to use for project
generation, and click OK.Your
selection does not change the
board specified in the Target
Preferences block. The softw are
connects to the selected board.
• Click Abort to stop the project
build and code generation proces s.
The software does not connect to
the IDE or board.
(*)
You may encounter the situation where you do not have the correct board
configured in C CS because of one of the following conditions:
• You changed your board con figuration after y ou added the Target
Preferences b lock to a model and saved the m odel. W he n y ou reopen the
model, the board speci fied in Board name in the block is no longer in
your configuration.
• You are working with a model from a source whose board configuration is
not the same as yours. The model includes a Target Preferences block.
Use
ccsboardinfo at the M ATLA B prompt to ve rify or review your configured
boards.
3-4