User`s guide

Targ et Preferences
Define internal memory banks (one or more memory banks)
Parameters in this group configure the mem ory map for the new
processor.
Define default sections (one or more default sections)
Parameters in this group configure the default sections for your
new processor.
Define internal memory banks
Name
To add a new physical memory segment to the internal memory
banks list, click Add, replace the temporary label in Name with
the one to use, and press Return. Your new segment appears
on the list.
After you add the segment, you can configure the starting address,
length, and contents for the new segment. New segments start
with code and data as the type of content that can be stored in the
segment (refer to the Contents option).
Names a re case sensitive.
NewSegment is not the same as
newsegment or newSegment.
Address
Address reports the starting address for the memory segment
showing in Name. Address entries are in hexadecimal format and
limitedonlybytheboardorprocessormemory.
When you are using a processor-s pe cific preferences block, the
starting address shown is the default value. You can czerose the
starting value by entering the new value directly in Ad dress
when you select the memory segm ent to change.
Length
From the starting address, Length sets the length of the
memory allocated to the segment in Name.Asinallmemory
entries, specify the length in hexadecimal format, in minimum
9-113