User`s guide

Targ et Preferences
Processor Family Processor Class String
DM64x and DM64xx 64xx where xx designates the
processor, such as DM6433 or
DM643.
C55xx
55xx where xx designates the
processor, such as C5502. For
C5503, C5507, and C5509
processors, use 55xx.
C28xx, F28xx, R28xx, F28xxx
28xx where xx designates the
processor, such as C2812. For
F283xx processors, use
2833x.
For F280xx processors, use
280x.
CPU clock
Provide a name to identify your new processor. You can use a ny
valid C string value in this field. The name you enter in this field
appears on the list of processors after you add the new processor.
Enter the clock speed of the p rocessor in MHz. When you enter
a value, you are n ot setting the CPU clock rate on the processor.
You are reporting the rate. If the value you enter does not match
the rate on the processor, your mo del’s real-tim e results may be
wrong, and code profiling results a re not correct.
Setting CPU clock to the actual b oard rate allows the g enerated
code to run correctly according to the actual clock rate of the
hardware.
Compiler switch
Identifies the process or family of the new processor to the
compiler. Successful compilation requires this switch. The string
depends on the processo r fam ily or class. For example, to set
the compiler sw itch for a new C5509 processor, enter
-ml.The
following table shows the compiler switch string for supported
processor f amilies.
9-111