User`s guide

Targ et Preferences

Specify the number of bursts in a transfer, from 1 to

65536.

This parameter corresponds to bits 15-0

(TRANSFERSIZE) in the Transfer Size Register

(TRANSFER_SIZE).

Note When you select Use DMA (with C28x3x) the

C280x/C28x3x ADC block, the value of this parameter

is 1.

• SRC wrap

Specify the number of bursts before returning the current

source address pointer to the Source Begin Address

value. To disable wrapping, enter a value for SRC wrap

that is greater than the Transfer value.

This parameter corresponds to bits 15-0

(SRC_WRAP_SIZE) in the Source Wrap Size

Note When you select Use DMA (with C28x3x) the

C280x/C28x3x ADC block, the value of this parameter

is 65536.

• DST wrap

Specify the number of bursts before returning the current

destination a ddress pointer to the Destination Begin

Address value. To disable wrapping, enter a value for

DST wrap that is greater than the Transfer value.

9-97