User`s guide

Targ et Preferences
Flash_loader
You can use Flash_loader to:
• Automatically program generated code to flashmemoryonthe
target wh en you build the code.
• Manually erase, program, or verify specific flash mem ory
sectors.
To use this feature, you must first d ownload and install the
appropriateTIFlashAPIplug-infromtheTIWebsite.
For more information, consult the “Programming Flash
Memory”topic in the Target Support Package TC2 User’s Guide
or the *_API_Readme.pdf file included in the TI Flash API
downloadable zip file.
Enable Flash Programmer
Enable the flash programmer by selecting a task for it to
perform when you click Execute or build the software. To
automatically program the flash memory when you build
the software, select
Erase, Program, Verify.
Detect Flash sectors to erase from COFF file
When enabled, the flash p rogrammer erases all of the flas h
sectors defined by the COFF file.
Erase Sector Selection
When Detect Flash sectors to erase from COFF file is
disabled, the selected flash sectors will be erased.
9-91