User`s guide

Tar get Preferences
SYSCLKOUT
escaler2*Pr
with the exception of zero. When Qualification sampling
period prescaler
=0, a sample is taken every SYSCLKOUT
clock tick. For example, a prescale setting of
0 means that a
sampleistakenoneachSYSCLKOUTtick.
The following figure shows the SYSCLKOUT ticks, a sample
taken every clock tick, and the Qualification type set
to
Qualification using 3 samples.Inthiscase,the
Qualification sampling period prescaler
=0:
In the next figure Qualification sam pling period
prescaler
=1. A sample is taken every two clock ticks, and
the Qualification type is set to
Qualification using 3
samples
. The output signal changes much later than if
Qualification sampling period prescaler
=0.
In the following figure, Qualification sam pling period
prescaler
=2. Thus , a sample is taken every four clock
ticks, and the Qualification type is set to
Qualification
using 3 samples
.
9-90