User`s guide

Tar get Preferences
SOMI pin assignment
Assigns the SPI something (SOMI) to a GPIO pin. Choices
are
None (default), GPI013,orGPI025.
STE pin assignment
Assigns the SPI something (STE) to a GPIO pin. Choices
are
None (default), GPI015,orGPI027.
Suspension Mo de
Type of suspension to use when debugging your program
with Code Composer Studio. When your program encounters
a breakpoint, the selected suspension mode determines
whether to perform the program instruction. Available
options are
Hard_abort, Soft_abort,andFree_run.
Hard_abort stops the prog ram immediately . Soft_abort
stops when the current receive or transmit sequence is
complete.
Free_run continues running regardless of the
breakpoint.
SPI_C
Parameters for the
SPI_C module include a ll the param eters for
the
SPI_A module.
SPI_D
Parameters for the
SPI_D module include a ll the param eters for
the
SPI_A module.
eQEP
AssignseQEPpinstoGPIOpinsifrequired.
EQEP1A pin ass ig nment
Select an option from the list—
GPIO20 or GPIO50.
EQEP1B pin assignment
Select an option from the list—
GPIO21 or GPIO51.
EQEP1S pin assignment
Select an option from the list—
GPIO22 or GPIO52.
9-86