User`s guide

Tar get Preferences
Be aware that these options may affect the options on the Sections
pane. You can make selections here that change how you configure
options on the Sections pane.
Most of the information about memory segments and m emory allocation
is available from the online help system for CCS.
Physical Memory Options
This list shows the physical memory segments available on the board
and processor. B y default, Target Preferences blocks show the memory
segments found on the selected processor. In addition, the Memory
pane on preconfigured Target Preferences blocks shows the memory
segments available on the board, but external to the processor. Target
Preferences blocks set de fault starting addresses, lengths, and contents
of the default memory seg ments.
The default mem ory segm ents for each processor and board are
different. For example:
• Custom boards based on C670x processors provide IPRAM and
IDRAM memory segments by default.
• C671x processors provide IRA M memory segment by default.
Name
When you highlight an entry o n the Memory bank list list, the
name of the entry appears in this field. To change the name of the
existing memory segment, select it on Memory bank list and
then type the new name in this field.
Note You cannot change the names of default processor memory
segments. You can chang e the attributes of memory s egm ents.
To add a new physical memory segment to the list, click Add,
replace th e temporary label in Nam e with the one to use, and
press Return. Your n ew seg m ent appears on the list.
9-54