User`s guide

profile
When you choose raw, returned variable ps contains an undocumented
list of the information provided by CCS IDE. The
tic option provides
the same information in
ps, as a collection of fields.
Fields in ps Description
ps.cpuload
Execution time i n percent of total time
spent out of the idle task.
ps.obj
Vector of defined STS objects in the
project.
ps.obj(n).name
User-defined name for an STS object
sts(n).Valueforn ranges from 1 to
the number of defined STS objects.
ps.obj(n).units
Either Hi Time or Low Time. Describes
the timer applied b y this STS object,
high- or low- resolution time based.
ps,obj(n).max
Maximum measured profile period for
sts(n),inseconds.
ps.obj(n).avg
Average measured profile period for
sts(n),inseconds.
ps.obj(n).count
Number of STS measurements taken
while executing the program.
Note When you e nable DSP/BIOS in y our project, your CLK and STS
must be configured correctly for the profiling information to be accurate.
Use the DSP/BIOS configuration file to add and configure CLK and
STSobjectsforyourproject.
With projects that you g enerate that use DSP/BIOS, the report
option creates a report that contains all of the information provided
by the other options, plus additional data that comes from DSP/BIOS
7-106