User`s guide

Exporting Filter Coefficients to Your Code Composer Studio Project
Note You cannot use reserved ANSI C programming keywords, such as
if or int as variable names, or include invalid characters such as spaces
or semicolons (
;).
7 In Data type to use in export,selectExport suggested to accept the
recommended export data type. FDATool suggests a data type that retains
filter coefficient fidelity.
You may find it useful to select the Export as option and select an export
data type other than the one suggested.
Caution If y ou dev iate from the sug ge sted data type, the exported filter
coefficients can be very different from the fi lter coefficients in FDATool. As
a result, your filter cutoff frequencies and performance may not match your
design in FDATool.
For more information about how FDATool decides which data type to
suggest, refe r to “How FD ATo ol Determines the E xport Suggested Data
Type” on page 5-7.
8 If you know the board number and processor number of your DSP, enter
DSP Board # and DSP Processor # valu es to iden tif y your bo ard.
When yo u have only one board or simulator, Em bedded IDE Lin k CC
software sets DSP Board # and DSP Processor # valuesforyourboard
automatically.
If you hav
e more than one board defined in CCS Setup:
5-11