User`s guide

1 Getting Started

Ifyoudonotseethelisting,orMATLABsoftwaredoesnotrecognizethe

command, you need to install E mbedded IDE Link CC. Without the software,

you cannot use MATLAB software with the objects to communicate with CCS.

Note F or up-to-date information about system requirements, refer to the

Embedded IDE Link CC system requirements page, available in the products

area at the MathWorks Web s ite (

http://www.mathworks.com).

Verifying Your Code Composer Studio Installation

To verify that CCS is installed on your machine and has at least one board

conﬁgured, enter

ccsboardinfo

at the MATLAB software command line. With CCS installed and conﬁgured,

MATLAB software returns information about the boards that CCS recognizes

on your machine, in a f orm similar to th e following listing.

Board Board Proc Processor Processor

Num Name Num Name Type

--- -------------------------------- --- -------------

1 C6xxx Simulator (Texas Instrum .0 6701 TMS320C6701

0 C6x13 DSK (Texas Instruments) 0 CPU TMS320C6x1x

If MATLAB software does not return information about any boards, open

your CCS installation a n d use th e S etu p U til ity i n CCS to conﬁgure at least

one board.

As a ﬁnal test, start CC S to ensure that it starts up succe ssfully. For

EmbeddedIDELinkCCtooperatewithCCS,theCCSIDEmustbeableto

runonitsown.

EmbeddedIDELinkCCusesobjectstocreate:

• Connections to the Code Composer Studio Integrated De velopment

Environment (CCS IDE)

1-8