User`s guide

Project Generator Tutorial
Ignore the Data Import/Export, Diagnostics,andOptimization categories
in the Configuration Parameters dialog box. The default settings are correct
foryournewmodel.
Setting Real-Time Workshop Code Generation Parameters
To configureReal-TimeWorkshopsoftwaretousethecorrectprocessor
files and to co mpile and run your model ex ecutable file, set the options in
the
Real-Time Workshop category of the Select tree in the Configuration
Parameters dialog box. Follow these steps to set the code generation options
foryourDSP:
1 Select Real-Time Workshop on the Select tree.
2 In processor selection,clickBrowse to select the system target file
for Embedded IDE Link CCcode generation —
ccslink_grt.tlc.Itmay
already b e the selected proces sor.
Clicking Browse opens the System Target File Browser to allow you
to changes the system target fi le.
3 On the Sy s t em Ta rget File Browser, select the system target file
ccslink_grt.tlc and click OK to close the browser.
Setting Embedded IDE Link CC Parameters
To configure Real-Time Workshop software to use the correct code generation
options a nd to compile and run your model executable file, s et the o ptions in
the
Embedded IDE Link CC category of the Select tree in the Configuration
Parameters dialog box. Follow these steps to set the code generation options
for your processor:
1 From the Select tree, c ho ose Embedded IDE Link CC to specify code
generation options that apply to the C6711 DSK processor.
2 Set the foll owing options in the pane under Project options:
• Project options should be
Custom.
• Set Compiler options string and Linker options string should be
blank.
3-45