Specifications

Testing with Code Composer Studio
Developing a DSP/BIOS Program 3-7
9) Choose Tools
→
RTDX to open the RTDX control window. Select RTDX
Disable from the pull-down list, then right-click on the RTDX area and
select Hide.
Note: Profiling and RTDX Cannot Be Used Together on Some Targets
The DSP/BIOS plug-ins use RTDX for host/target communication. On
some DSP targets (for example, the TMS320C6201) you cannot use both
profiling and RTDX at the same time. Close all tools that uses RTDX, such
as the Message Log and other DSP/BIOS plug-ins, before using profiling.
To ensure that RTDX is disabled, especially after using DSP/BIOS plug-ins,
choose Tools
→
RTDX to open the RTDX plug-in. Select RTDX Disable from
the pull-down list, then right-click and select Hide.
Conversely, after using profiling, free the profiler resources before using
RTDX, as described in section 2.8, page 2–14.
An error message similar to the following is shown if you attempt to use
RTDX and profiling at the same time: