Specifications

Code Composer Studio Development
1-2
1.1 Code Composer Studio Development
Code Composer Studio extends the basic code generation tools with a set of
debugging and real-time analysis capabilities. Code Composer Studio
supports all phases of the development cycle shown here:
In order to use this tutorial, you should have already done the following:
❏
Install target board and driver software
. Follow the installation
instructions provided with the board. If you are using the simulator or a
target board whose driver software is provided with this product you can
perform the steps in the Installation Guide for this product.
❏
Install Code Composer Studio
. Follow the installation instructions. If you
have Code Composer Studio Simulator and the TMS320C6000 code
generation tools, but not the full Code Composer Studio, you can perform
the steps in Chapter 2 and in Chapter 4.
❏
Run Code Composer Studio Setup
. The setup program allows Code
Composer Studio to use the drivers installed for the target board.
Design Debug AnalyzeCode & build
conceptual
planning
create project,
write source code,
configuration file
syntax checking,
probe points,
logging, etc.
real-time
debugging,
statistics, tracing