Installation guide

3 Configuring Parallel Computing Products for HPC Server
Configure Cluster for Microsoft Windows HPC Ser ver
Follow these instruction to configure your MDCS installation to work w ith
Windows HPC Server o r Compute Cluster Server (CCS). In the f ollow ing
instructions,
matlabroot refers to the M ATLA B installation location.
Note If using HPC Server 2008 in a network share installation, the network
share location must be in the “Intranet” zone. You might need to adjust the
Internet Options for your cluster nodes and add the network share location
to the list of Intranet sites.
1 Log in on a cluster machine as a user with administrator privileges.
2 Open a command window with administrator privileges and run the
following file command
matlabroot\toolbox\distcomp\bin\MicrosoftHPCServerSetup.bat -cluster
This command performs all the setup required for a cluster. The location of
the MATLAB installation must be the same on every cluster node.
Note Ifyouneedtooverridethedefaultvaluesthescript,modify
the values defined in
MicrosoftHPCServer Set up.xml before running
MicrosoftHPCServ erSe tup.bat.Usethe-def_file argument to the
script when using a
MicrosoftHPCServer Setu p.xml file i n a custom
location. For example:
MicrosoftHPCServer Setu p.bat -cluster -def_file <filename >
3-2
For help, contact the MathWorks install support team at
508-647-7000 or http://www.mathworks.com/support/contact_us