Installation guide

2 Configuring Parallel Computing Products for a Job Manager
4 Look in /etc/inittab for the default run level. Create a link in the rc
folder associated with that run level. For example, if the run level is 5,
execute these commands:
cd /etc/init.d /rc5 .d;
ln -s ../mdce S99MDCE
RedHat,FedoraPlatform
On each cluster node, register the mdce service as a k now n service and
configure it to start automatically a t system boot time by following these steps:
1 Create the following link, if it does not already exist:
ln -s matlabroot/toolbox/distcomp/bin/mdce /et c/md ce
2 Create the following link to the boot script file:
ln -s matlabroot/toolbox/distcomp/bin/mdce /et c/in it.d /mdce
3 Set b oot script file permissions:
chmod 555 /etc/init.d/mdce
4 Look in /etc/inittab for the default run level. Create a link in the rc
folder associated with that run level. For example, if the run level is 5,
execute these commands:
cd /etc/rc.d/r c5.d ;
ln -s ../../init.d/mdce S99MDC E
Macintosh Platform
On each cluster n ode, register the mdce service as a known service with
launchd, and configure it to start automatically at system boot time by
following these steps:
1 Navigate to the toolbox folder and stop the running mdce service:
cd matlabroot/toolbox/distcomp/ bin
2-20
For help, contact the MathWorks install support team at
508-647-7000 or http://www.mathworks.com/support/contact_us