Installation guide

ConfigureClustertoUseaMATLAB
®
Job Scheduler (MJS)
ln -s matlabroot/toolbox/distcomp/bi n/md ce /etc/mdce
2 Create the following link to the boot script file:
ln -s matlabroot/toolbox/distcomp/bi n/md ce /etc/init .d/ mdce
3 Set the boot script file permissions:
chmod 5 55 /etc/init.d/m dce
4 Look in /etc/inittab for the default run level. Create a link in the rc
folder associated with that run level. For example, if the run level is 5,
execute these commands:
cd /etc /rc5 .d;
ln - s ../init.d/mdce S99MDC E
SUSE Platform
On each cluster node, register the mdce service as a known service and
configure it to start automatically at system boot time by following these steps:
1 Create the following link, if it does not already exist:
ln -s matlabroot/toolbox/distcomp/bi n/md ce /etc/mdce
2 Create the following link to the boot script file:
ln -s matlabroot/toolbox/distcomp/bi n/md ce /etc/init .d/ mdce
3 Set the boot script file permissions:
chmod 5 55 /etc/init.d/
mdce
4 Look in /etc/inittab for the default run level. Create a link in the rc
folder associated with that run level. For example, if the run level is 5,
execute these commands:
cd /etc /ini t.d/ rc5.d;
ln - s ../mdce S99MDCE
2-19
For help, contact the MathWorks install support team at
508-647-7000 or http://www.mathworks.com/support/contact_us