Installation guide

ConfigureClustertoUseaMATLAB
®
Job Scheduler (MJS)
Start the MJS. To start the MATLAB job scheduler (MJS), enter the following
commands in a DOS command window. You do not have to be at the m achine
on which the MJS runs, as long as you have access to the MDCS installation.
1 In your DOS command window, navigatetothefolderwiththestartup
scripts:
cd matlabroot\toolbox\dis tcom p\bi n
2 Start the MJS, using any unique text you want for the name <MyMJ S>:
startjobmanager -name <MyMJS> -remotehost <MJS host name> -v
3 Verify that the MJS is running on the intended host.
nodestatus -remotehost <MJS host name>
Note If you a re executing startjobmanager on the host where the MJS
runs, you do no t n eed to specify the
-remotehost flag.
If you have more than one MJS on your cluster, each must have a unique
name.
Start the Workers.
Note Before you can start a worker on a m achine, the mdce service must
already be running on that machine, and the license manager for MATLAB
Distributed Computing Server must be running on the network.
For each node used as a worker, enter the following commands in a DOS
command window. You do not have to be at the machines where the MATLAB
workers will run, as long as you have access to the MDCS installation.
1 Navigate to the folder with the startup scripts:
cd matlabroot\toolbox\dis tcom p\bi n
2-15
For help, contact the MathWorks install support team at
508-647-7000 or http://www.mathworks.com/support/contact_us