User guide

System Generator for DSP User Guide www.xilinx.com 357
UG640 (v 12.2) July 23, 2010
Black Box Examples
14. Save the changes to the configuration M-function and recompile the model (Ctrl-d).
Your subsystem should appear as follows:
15. From the black box block parameter dialog box, change the Simulation mode field
from Inactive to External co-simulator. Enter ModelSim in the HDL co-simulator to
use field. The name in this field corresponds to the name of the ModelSim block that
you added to the model. The black box dialog box should appear as follows: