User guide

34 www.xilinx.com System Generator for DSP User Guide
UG640 (v 12.2) July 23, 2010
Chapter 1: Hardware Design Using System Generator
• MAC Engine: used as a Multiply-Accumulator operator for the filter
2. Double-click on the System Generator token to bring up the following dialog box:
As shown above, select Expose Clock Ports, then click Generate. After a few moments, a
sub-directory named hdl_netlist is created in the current working directory containing the
generated files.
3. Launch ISE, then load the ISE project at pathname
./hdl_netlist/expose_clock_ports_case1_mcw.ise