User guide

306 www.xilinx.com System Generator for DSP User Guide
UG640 (v 12.2) July 23, 2010
Chapter 3: Using Hardware Co-Simulation
Connecting Xilinx USB cable to the SP605 board
Connecting Xilinx USB cable and AC power cable to the SP601 board
4. Connect the large end of the Mini USB cable to a USB socket on your PC.
5. Connect the AC power cord to the power supply brick. Plug the power supply adapter
cable into the SP601/SP605 board. Plug in the power supply to AC power.
6. Turn the SP601/SP605 board Power switch ON.
Connect Large
End to PC
Connect Small
End Here
USB JTAG
Cable
Power
Cable