User guide

30 www.xilinx.com System Generator for DSP User Guide
UG640 (v 12.2) July 23, 2010
Chapter 1: Hardware Design Using System Generator
2. Double-click on the System Generator token to bring up the following dialog box:
As shown, select Hybrid DCM-CE, then click Generate. After a few moments, a sub-
directory named hdl_netlist_dcm is created in the current working directory containing
the generated files.
3. In the MATLAB Current Directory window, double-click on the file
hybrid_dcm_ce_case1_sysgen.log. As shown below, the DCM clocks are listed
first (highest rates first), followed by the CE driven clocks.
4. Launch ISE, then load the ISE project at pathname
./hdl_netlist_dcm/hybrid_dcm_ce_case1_dcm_mcw.ise
5. Under the Project Navigator Processes view, double-click on Implement Design.
6. From the Project Navigator Design Sources Hierarchy view, do the following: