User guide

System Generator for DSP User Guide www.xilinx.com 211
UG640 (v 12.2) July 23, 2010
Designing with Embedded Processors and Microcontrollers
1. Delete the Subsystem block from the fir_example_mb.mdl model as shown below:
2. Now you will replace it with the hardware co-simulation block you just generated.
Open the file ...netlist\Subsystem_hwcosim_lib.mdl. then copy and paste the
generated hwcosim block into the model as shown in the figure below.
3. Save the model fir_example_mb.mdl as fir_example_mb_hwcs.mdl