User guide

208 www.xilinx.com System Generator for DSP User Guide
UG640 (v 12.2) July 23, 2010
Chapter 2: Hardware/Software Co-Design
2. Double-click on the MicroBlaze Processor Subsystem to open down to a lower
hierarchy
3. Open the Simulink Library Browser, then open the Xilinx Blockset/Index folder. Select
and Drag an EDK Processor block into the Subsystem sheet as shown above. Select the
pulldown menu File > Save to save the sheet.
4. Double-click on the EDK Processor block and select HDL netlisting in the Configure
Processor for pull down menu.
5. Click the Import button and use the Import EDK project... dialog box to select the XPS
project that you just created in Step 2. The file is called system.xmp in the XPS
directory.