User guide

186 www.xilinx.com System Generator for DSP User Guide
UG640 (v 12.2) July 23, 2010
Chapter 2: Hardware/Software Co-Design
•Flow control = none
Set the simulation time of the testbench model to inf, allowing enough simulation time for
the MicroBlaze processor to wake up and respond.
Using XPS
This topic provides a quick tutorial on several aspects of the Xilinx Embedded
Development Kit (EDK). Please refer to the EDK documentation for more in depth
explanations and tutorials.
Tutorial Example - Creating a New XPS Project
The Base System Builder is an EDK Wizard to help you construct a fully configured EDK
project. This topic walks you through creating an EDK project configured with a
MicroBlaze™ Processor, running on a Xilinx ML402 hardware development board.
1. Launch Xilinx Platform Studio from the Windows start menu
2. When XPS launches, the following dialog should appear. Select Base System Builder
wizard (recommended), then click OK.
3. Next, specify the XPS project name as system.xmp and the location, as shown below,
then click OK.