Specifications

ltiview
16-133
ltiview(plottype,sys,extras) allows the additional input arguments
supported by the various LTI model response functions to be passed to the
ltiview command.
extras is one or more input arguments as specified by the function named in
plottype.Thesearguments maybe requiredoroptional,dependingonthetype
of LTI response. For example, if
plottype is 'step' then extras may be the
desired final time,
Tfinal, as shown below.
ltiview('step',sys,Tfinal)
However, if plottype is 'initial',theextras arguments must contain the
initial conditions
x0 and may contain other arguments, such as Tfinal.
ltiview('initial',sys,x0,Tfinal)
See the individual references pages of each possible plottype commands for a
list of appropriate arguments for
extras.
ltiview('clear',viewers) clears the plots and data from the LTI Viewers
with handles
viewers.
ltiview('current',sys1,sys2,...,sysn,viewers) addstheresponsesofthe
systems
sys1,sys2,...,sysn to the LTI Viewers with handles viewers.If
these new systems do not have the same I/O dimensions as those currently in
the LTI Viewer, the LTI Viewer is first cleared and only the new responsesare
shown.
Finally,
ltiview(plottype,sys1,sys2,...sysN)
ltiview(plottype,sys1,PlotStyle1,sys2,PlotStyle2,...)
ltiview(plottype,sys1,sys2,...sysN,extras)
initializes an LTI Viewer containing the responses of multiple LTI models,
using the plot styles in
PlotStyle, when applicable. See the individual
reference pages of the LTI response functions for more information on
specifying plot styles.
See Also bode Bode response
impulse Impulse response
initial Response to initial condition
lsim Simulate LTI model response to arbitrary inputs