Specifications

13 SISO Design Tool Reference
13-34
•In-Y — Zoom in, Y-axis only. To do this, select In-Y, hold down your mouse’s
left button, and drag vertically to create a line parallel to the Y-axis. When
you release the left button, the selected area becomes the new Y-axis limits.
•
Out — Select Out to undo the last zoom in that you did. If you have not done
anyzooming,or if youhaveundid all yourzoomenlargements,the
Out menu
item is grayed out.
Grid
Grid adds a grid to the Bode diagram.
Properties
Properties opens the Property Editor for Bode diagrams. This window is
exactly the same as the Property Editor for root locus, except for the
Options
page, which is shown below.
The options are customized for features that apply to Bode diagrams only.
For a complete discussion of the Property Editor for Bode diagrams, see
Customizing Plots Inside the SISO Design Tool.
You can also activate this window by double-clicking anywhere in the gain or
phase plots away from the curves.