User`s guide

E-3
LoadLibrary("component_name_1_
0.dll") failed - The specified
module could not be found.
You may get this error
message while
registering the project
DLL from the DOS
prompt. This usually
occurs if MATLAB is
not on the system path.
Place
<matlab>\bin\win32 on
your path.
Cannot recompile the M file
xxxx because it is already in
the library libmmfile.mlib.
The name you have
chosen for your M-file
duplicates the name of
an M-file already in the
library of precompiled
M-files.
Rename the M-file, choosing a
name that does not duplicate
the name of an M-file already
in the library of precompiled
M-files.
Table E-1: MATLAB Excel Builder Errors and Suggested Solutions (Continued)
Message Probable Cause Suggested Solution
Table E-2: Excel Errors and Suggested Solutions
Message Probable Cause Suggested Solution
The Macros in this project are
disabled. Please refer to the
online help or documentation
of the host application to
determine how to enable
macros.
Note: Wording may vary depending
upon the version of Excel you are
running.
The macro security for
Excel is set to
High.
Set Excel macro security to
Medium on the
Security Level tab
(
Tools > Macro > Security).