User`s guide

1. Click the Start button, point to Settings or Printers & Faxes ( win XP ),
then click Printers.
2. Select the icon for your printer, then
click Properties on the File menu.
Then click the Maintenance tab.
3. Click the Nozzle Check button, and
follow the on-screen instructions.
4. When you are finished, click OK to
close the Properties dialog box.
Your printer is now set up and ready to
use.
1. Select Page Setup in the Finder’s File menu.
2. Click the utility icon.
3. Click the Nozzle Check
button, and follow the
on-screen instructions.
4. When you are finished,
click OK to close the utility
dialog box. Then click OK
to close the Page Setup
dialog box.
Your printer is now set up and ready to use.
Once the paper is loaded, follow these steps to check the print head nozzles.
Press Paper Insert into back of printer.
For Windows users
For Macintosh users
Page 10
Page 7
Click the Print Button to start printing.
Note:
The printer settings used in the example above are as a guide only. Using different
Media types & Colour management settings will enable you to reproduce colours
more accurately on various types of printable CD media.
NOTE
Before Printing to CD Select
a) PROPERTIES
b) PLAIN PAPER
c) PHOTO
d) A4 210 x 297 mm
e) In ADVANCED Settings
no selected HIGH SPEED
Note:
If the printer has not been used for 20 seconds it will drop into Energy Saving Mode.
Before printing a CD, the printer needs to be brought out of it’s Energy Saving Mode, Press
the maintenance switch ONCE then wait until any activity stops.
Load caddy, press the maintenance switch again, caddy is loaded into print start position.
Print the CD within a couple of minutes.
Press Once
Print to CD - SETTING EXAMPLE