User's Manual

Telemetry KIT MPYV2
User Manual and Maintenance
Document code: MPYV2-KMT.HL.MUM.001_ENG - rev. 1.1
Page 9 / 43
The copyright of this document is vested in Matipay S.r.l. - This document can not be reproduced in whole or in part, or stored in a
retrieval system, or transmitted in any form, or by any means without the prior permission of Matipay S.r.l.
2 Introduction
This manual contains the description of the operations and the instructions necessary to correctly
carry out the main operations of use, ordinary and periodic maintenance of the modules defined
in §1.4 (henceforth simply referred to as modules).
For a practical consultation, this manual is divided into easily identifiable chapters.
The instructions given in this manual are intended for specialized personnel with specific
knowledge and skilling.
Such personnel must be authorized, trained and adequately instructed about dangerousness of
voltages and electric currents.
This manual, in the event of sale or selling, must always be delivered together with the KIT.
2.1 Information on this Manual
This manual is to be considered an integral part of the SmartCheck Module and must accompany
it in the event of resale and up to its disposal.
In case of loss or damage to the present manual, please request a copy to the manufacturer
(Matipay S.r.l.).
This manual is made up of forty-third (43) pages and during its editing it was decided to use a
few but obvious symbolic images in order to make the consultation easier and more immediate.
The presence of this symbol indicates to pay maximum attention to the
subject matter.
The presence of this symbol indicates additional information or advice to
optimize the use of the product.
The EU Declarations of Conformity of the modules are available by forwarding the request to:
[e-mail]
2.1.1 Obligations for employer
The employer is responsible for the disclosure of this document to all personnel who will interact
with the modules.
2.1.2 Obligations for operators
In addition to the duty to strictly follow the instructions contained in this manual, operators are
obliged to report to their direct supervisors any deficiency or potentially dangerous situation that
may occur.