User's Manual

Telemetry KIT MPYV2
User Manual and Maintenance
Document code: MPYV2-KMT.HL.MUM.001_ENG - rev. 1.1
Page 8 / 43
The copyright of this document is vested in Matipay S.r.l. - This document can not be reproduced in whole or in part, or stored in a
retrieval system, or transmitted in any form, or by any means without the prior permission of Matipay S.r.l.
1 Introduction
1.1 Applicable Documents
[App.1] ARG.CE.RCH «Analisi di Rischio Modulo Telemetrico MOD_HWT», rev. 0.2,
11/07/2016
[App.2] MPYV2.HL.HA.010 «Analisi dei Rischi (Safety)- Modulo di Pagamento», rev. 1.0,
10/02/2020
[App.3] MPYV2.HL.AP.005 «Albero di Prodotto», rev. 1.0, 29/01/2020
1.2 Acronyms
In the following table are listed and explained the recurring acronyms that have been used in
this document.
Acronyms
Description
VM
Vending Machines
VMC
Vending Machine Controller
NFC
Near Field Communication
HW
Hardware
FW
Firmware
SW
Software
BLE
Bluetooth Low Energy
DUT
Device Under Test
LVD
Low Voltage Directive
EMC
Electromagnetic Compatibility
RED
Radio Equipment Directive
Table 1 – Acronyms
1.3 Scope
This document is the user manual containing the information for the correct use of the modules
MOD_HWT_INT, having P/N WI9152PMX and MOD_MPYV2_SPAY_C1 having P/N WI9250PM1,
which constitute the Telemetry KIT MPYV2.
1.4 Field of Application
This document applies to the commissioning, use and maintenance and decommissioning phase
of the following modules:
• Module MOD_HWT_INT, P/N WI9152PMX, Baseline 2.0
• Module MOD_MPYV2_SPAY_C1, P/N WI9250PM1, Baseline 1.0.
which constitute the Telemetry KIT MPYV2 defined in [App.3], and, hereafter in the following
pages, indicated as KIT.