User's Manual

Telemetry KIT MPYV2
User Manual and Maintenance
Document code: MPYV2-KMT.HL.MUM.001_ENG - rev. 1.1
Page 36 / 43
The copyright of this document is vested in Matipay S.r.l. - This document can not be reproduced in whole or in part, or stored in a
retrieval system, or transmitted in any form, or by any means without the prior permission of Matipay S.r.l.
10 Long Term Storage
For long term inactivity periods it is necessary to store the modules in a dry place protected from
atmospheric agents, making sure to protect them to avoid damage.
Before storage it is recommended to clean the products.
Both the backup battery of the MOD_HWT_INT module, and the CR2032 button battery of the
MOD_MPYV2_SPAY_C1 module, must be disconnected from the respective modules.
Table 9 shows the temperature limits allowed in case of storage for the modules and the
respective batteries
Device
Storage Temperature Range
MOD_HWT_INT Module
-20°C / +70°C
MOD_MPYV2_SPAY_C1 Module
-20°C / +70°C
Battery HOWELL Model
HW484594
-20°C / +45°C
Button Battery Model Panasonic
CR2032 3V 220mAh
-30°C / +60°C
Table 9 – Storage Temperature Range – Long Term.
It is also recommended for the backup battery present inside the MOD_HWT_INT module, to
check every 3 months that the voltage present at its ends is within the range of values 3,6V-
3,9V.
If the aforementioned check notifies a voltage value outside those indicated, we strongly
recommend that you restore the temperature conditions declared in the previous paragraph.