User's Manual

Telemetry KIT MPYV2
User Manual and Maintenance
Document code: MPYV2-KMT.HL.MUM.001_ENG - rev. 1.1
Page 25 / 43
The copyright of this document is vested in Matipay S.r.l. - This document can not be reproduced in whole or in part, or stored in a
retrieval system, or transmitted in any form, or by any means without the prior permission of Matipay S.r.l.
Connect the Telemetry Module MOD_HWT_INT to the VM internal devices by means of
CABLE_CUSTOM_MDB/EVA-DTS_POWERSUPPLY (see Figure 5), as shown in Figure 13.
This cable has a length less than 3 meters.
MDB/POWER SUPPLY
EVA-DTS/VMC
EVA-DTS/COIN BOX
Figure 13 – Connection of CABLE_CUSTOM_MDB/EVA-DTS_POWERSUPPLY to the Telemetry Unit
During the installation of the Telemetry Unit, pay attention to the cable
routing path. If not positioned correctly, it could be damaged during the
opening or closing phases of the VM.