User's Manual

Telemetry KIT MPYV2
User Manual and Maintenance
Document code: MPYV2-KMT.HL.MUM.001_ENG - rev. 1.1
Page 24 / 43
The copyright of this document is vested in Matipay S.r.l. - This document can not be reproduced in whole or in part, or stored in a
retrieval system, or transmitted in any form, or by any means without the prior permission of Matipay S.r.l.
Figure 1 – MOD_MPYV2_SPAY_C1, battery holder.
7.1.3 Modules connection
Carry out the following steps in sequence.
Connect the modules to each other by means of the CABLE_CUSTOM_MAIN/SLAVE_BOARD (see
Figure 4), as shown in Figure 12.
This cable has a length less than 3 meters.
Figure 12 – Connection with CABLE_CUSTOM_MAIN/SLAVE_BOARD