User's Manual

Telemetry KIT MPYV2
User Manual and Maintenance
Document code: MPYV2-KMT.HL.MUM.001_ENG - rev. 1.1
Page 21 / 43
The copyright of this document is vested in Matipay S.r.l. - This document can not be reproduced in whole or in part, or stored in a
retrieval system, or transmitted in any form, or by any means without the prior permission of Matipay S.r.l.
Apply a slight pressure on the tabs 1 and 3 indicated in Figure 8 and at the same time act to
release the upper part of the module casing. Then repeat the procedure on the tabs marked with
2 and 4 in Figure 8. At this point the upper part of the casing will be released from the lower one
as illustrated in Figure 9.
Figure 8 – MOD_HWT_INT, details of opening tabs
Figure 9 – MOD_HWT INT, enclosure disassembly