User's Manual

Telemetry KIT MPYV2
User Manual and Maintenance
Document code: MPYV2-KMT.HL.MUM.001_ENG - rev. 1.1
Page 19 / 43
The copyright of this document is vested in Matipay S.r.l. - This document can not be reproduced in whole or in part, or stored in a
retrieval system, or transmitted in any form, or by any means without the prior permission of Matipay S.r.l.
6.2 Accessories and optional wirings
ACCESSORIES/WIRINGS
NAME
PART NUMBER
GSM/GPRS ANTENNA
VARBM02812XXXAA
CABLE_CUSTOM_
TX RX DB9 FAS INVERSION
CAVI9168PMXAG
MicroSD HC Class 10 (pre-
formatted with FAT32 file
system)
Table 7 – Accessories and optional wirings
The GSM / GPRS antenna is supplied, on request, as an optional accessory. It is already equipped
with cables and connectors.
If it is necessary to invert the EVA-DTS serial communication signals, the use of an adapter cable
such as the one shown in Figure 6 is required.
SIDE 1
CONNECTED PINs: 2-3-5
OTHER PINs: NOT CONNECTED
SIDE 2
CONNECTED PINs: 2-3-5
OTHER PINs: NOT CONNECTED
Figure 6 - CABLE_CUSTOM_ TX RX DB9 FAS INVERSION