User's Manual

Telemetry KIT MPYV2
User Manual and Maintenance
Document code: MPYV2-KMT.HL.MUM.001_ENG - rev. 1.1
Page 11 / 43
The copyright of this document is vested in Matipay S.r.l. - This document can not be reproduced in whole or in part, or stored in a
retrieval system, or transmitted in any form, or by any means without the prior permission of Matipay S.r.l.
4 MOD_HWT_INT Description
The MATIPAY WI9152PMX MOD_HWT_INT module, hereinafter also referred to as the Telemetry
Module, consists of an electronic card placed inside a plastic container with external dimensions
140x100x22mm and overall weight less than 200g.
Inside the plastic container there is also a rechargeable LI-ION battery that provides power to
the board in case of power failure.
The Telemetry module is responsible for providing system connectivity to a remote Server via
GSM / GPRS modem installed on the electronic board inside the module itself.
In Figure 3 the MOD_HWT_INT is shown, while in Table 2 the connectors (internal / external)
and the slots of the module itself are described. The Table 3 describes the correspondences
between ports / interfaces and the external connectors of the module
Figure 2 – MOD_HWT_INT, views, slots and connectors.