Users Manual Part 2

Full Color Card Printer
76
3 (If cards can be seen in the feed slot)
Rotate the reverse feeding knob.
• Remove cards jammed in the cleaning section from
th
e f
eed slot.
•
Cards jammed in the reverse section can also b
e
output.
•
If the jam is cleared, then go
to Step 8.
4 Open the Front Cover and Top Access
Cover.
• Press the open over switch, and pull the Front Cover
f
orw
ard.
•
Hold the handle of the Top Access Cov
er and lift to
open.
•
If you do not open the Front Cover, then y
ou cannot
op
en the Top Access Cover
.
5 Confirm the location of jammed cards.
• To confirm the interior of the decurl section, first
rele
ase the lock on the decurl section as at ri
ght
be
fore lift
ing.
• When checking inside the reverse section, remove the
C
leaning Roller and Cleaning Tape Cassette
.
→See "C
leaning Tape Replacement" on page 22 an
d
"Cleaning the Cleaning Roller" on page 59 for
instr
uctions on removing
the Cleaning Roller and
C
leaning Tape Cassette.
6 (If the card is in the reverse section)
a Rotate the reverse knob so that the
cards are parallel, and rotate the
feeding knob left and right.
• If the feeding knob is rotated to the left, then jammed
cards are output from the C
ard Ejection Slot (Left)
,
an
d if this is rotated to the rig
ht, then these are output
from Card Ejection Slot (Right).
•
Do not turn the card feeding knob, reverse feeding
knob or reverse knob without checking the condition of
the card inside the printer.
T
here is a danger of parts breakage and card loss
.
If
the card is lost, please contact your reseller
.
Reverse Feeding Knob
Cleaning Section
Decurl Section
a
b
Reverse Section
Reverse
Feeding Knob
Reverse
Knob
Operating Manual MC660
Matica Technologies