User`s manual

Shutting Down the System Preparing Your Printer for Printing
8-36 Sprinter User's Manual
If the printer does not respond to commands given by the computer or if there is
any problem that requires a immediate stop, press one of the red Emergency
Stop buttons, located at the front and rear of the printer.
Pressing the Emergency Stop button shuts down the power to the printer as well
as to the computer. The files displayed in the Print menu of the Main Screen will
not be deleted.
You can release the Emergency Stop button by turning it in a clockwise
direction.
Return the Circuit Breaker switch to the ON position.
Press the button next to the Main Circuit Breaker Switch.
The Safety Switches
To prevent injury during printing, the printer is equipped with five
Interlock switches, at the following locations:
• For the F
RONT COVER.
• For the T
OP DOOR COVER.
• For the S
UBSTRATE PASS DOOR.
• For the R
EAR COVER.
• For the S
UBSTRATE COLLECTOR ROLLER COVER.
The switches are engaged whenever any of the above covers or doors are
opened during printing. When this occurs, the following warning is
displayed:
Shutting Down the System
When the printing run is complete and you don’t intend to work for the
remainder of the day or for a longer period of time, you should shut down
system down.
! To shut the system down:
1. Click the U
NLOAD icon in the MAIN SCREEN.
2. Make a visual check to confirm that the printer is in the U
NLOAD mode.
The P
ULLING ARM should be up.
The R
UBBER ROLLER should be down.
3. Shut down the PC.
If you wish to shut the system down for a long period of time, shut
down the main switch located at the back of the printer.
4. Place a sponge under the P
ULLING ARM.
5. Close all the Printer’s covers.