User`s manual

The Printing Procedure Preparing Your Printer for Printing
8-34 Sprinter User's Manual
Printing the Files Queued on the Print Menu
Before printing the required files, you should read the following information on
the Online Delay feature.
Figure 8-27: The Printing Dialog Box
The On-the-fly Fine Adjust Delay
Although the HEAD DELAY feature is accessible from the CONFIGURATION
dialog box for setting before a print session, you can also adjust the H
EAD
DELAYS while printing, through the PRINT command. This is called ONLINE
HEAD DELAY adjustment.
The adjustment will only take effect from the printing of the next file in the
queue. The new delay value(s) will be applied to the remaining files in the
queue and the values in the C
ONFIGURATION dialog box are automatically
adjusted. Further adjustments may be made on later enqueued files, and
those values will also be automatically adjusted in the C
ONFIGURATION
dialog. The values in the dialog box are those that were adjusted last. The
values in the P
RINTING dialog box returns to zero at the beginning of the
next print session.
This adjustment can be carried out as many times as required during the
print session.