User`s manual

Preparing Your Printer for Printing Software Preparations for Printing
Sprinter User's Manual 8-23
6. Click and drag the line to the required setting and release the mouse
button.
7. Repeat steps 3-6 as required.
8. Click Save to save the setting.
The S
AVE AS dialog box appears.
9. Enter a file name and click OK.
10. Close the G
RAY LEVEL dialog box.
11. With the E
DIT dialog box open, click BROWSE and choose the file whose
gray level you wish to adjust.
The file name appears in the G
RAY LEVEL ADJUSTMENT field.
12. Click OK.
The selected file name appears in the GL column of the Main Screen.
Disguising Noise
The NOISE feature is accessible from the EDIT dialog box.
It enables you to disguise any repetitive errors that appear in the printing,
such as those resulting from bending, in 50dpi files only.
For example, if bending has occurred in one or more colors, you should
adjust the N
OISE levels of the relative colors.
The maximum unit value of the Noise adjustment is 30.
If you set the noise level too high, it will result in the image becoming blurred.
Printing a Serial Number
This optional feature enables you to print a serial number on each whole
printed image. The feature works if the E
NABLE SERIAL NUMBERS OPTION is
checked in the U
PDATE USER SERVICE dialog box.
You cannot print a Serial Number on a sliced image. Nor can you print one on
images that are narrow enough to be printed on the same row.
The
SERIAL NUMBER is printed on the actual image. To avoid this, and to
print it on the
SUBSTRATE, check the TRANSPARENT option. When this
option is checked, the printed matter is erased in the shape of the
SERIAL
NUMBER, which in turn, is printed directly onto the SUBSTRATE.
! To print a Serial Number:
1. In the
SERIAL NUMBER group box of the EDIT dialog box, check the
ENABLE option.
2. Click the
SERIAL NUMBER button (12345…).
The
SERIAL NUMBER FONT dialog box appears.